Inexpensive (Cheap) LED
Electronic Message Centers
Need the look and prestige of an electronic message center to help your
business grow, but can't afford it?
Can you survive with one fixed message?
Single OR multi-color?
We can manufacture a LED electronic message with the same look, features,
and display of the most expensive variable-display message center, for 1/2
Signs Manufacturing™ sign company incorporates a patent pending high-tech design into our unique
PinLights™ LED first-surface lighting systems
feature SolarBrite™ LEDs that are optically enhanced to appear larger.
signs with color graphics and PinLights™ LED first-surface lighting is a
No other face-decorated cabinet sign incorporates direct lighting.
And when compared to incandescent lighting or fluorescent
back-lighted cabinet signs it is better-looking, cheaper, lasts longer, and uses
The US Small
Business Administration (SBA) says that an electronic message center will
increase a store's volume 15 to 150%.
The attribute that
makes LED Electronic Message Centers so effective is that they use light to
attract attention during the day.
This is the only
other sign face that can do so.
first-surface lighting, again like electronic message centers, you determine the
daytime brightness of your sign by the density, colors, and patterns of lighting
PinLights™ gives you choices, unlike all other forms
can also comply
with many cities bans on flashing lights, which causes electronic message
centers to be banned or severely restricted, or they can flash or twinkle (in
multiple or varying colors.)
But at a minimum the decorated sign face is comparable to a traditional back-lighted sign
face when not lighted.
In other words, a
PinLights™ sign will always look better, and attract
more attention, than any cabinet sign ever built previously; and...it can cost about the
same to purchase, but use less energy.
Many companies manufacture
LEDs. There are over 5,000 varied LEDs available,
and they vary greatly as to brightness, lux, light-dispersal
(viewing) angle, useful lifetime, and lifetime.
Some are very cheap, some are quite
Signs Manufacturing™ only uses SolarBrite™ LEDs
that are rated to retain 80% of their brightness for
60,000+ hours. These are the most expensive, but highest value, LEDs.
Our selection of LEDs is what makes our signs brighter, and last longer.
As an example, a White SolarBrite™ LED is 280 lux, compared to our
BrighterSigns™ neon's 235 lux, or standard neon's 140 lux.
A SolarBrite™ LED incorporates a new kind of chip, different from all
Signs Manufacturing™ is an industry leader in the
implementation of new technology in advertising.
SolarBrite™ LEDs utilize military specification
coatings on the circuit boards the LEDs are attached to,
preventing corrosion and electrical problems.
Like neon, LEDs are also affected by
voltage. For instance, an LED will also burn nearly
100% brighter if you double the power feeding it.
The LED will last about 1/6 as long, however, making this
alternative quite expensive in total cost.
We power our SolarBrite™ LEDs properly.
SolarBrite™ PinLights™ LEDs are available
in 5 fixed colors (Red, Green, Blue, White and Yellow) or as multi-color
infinitely-variable individual lights featuring 65,000,000 colors.
Unlike virtually every other LED sign currently manufactured, each individual PinLights™
LED is independently serviceable.
And if a single LED does fail all of the other LEDs still light. Our
wiring is in parallel, not in series.
In most instances
PinLights™ LED first-surface lighting systems can be
retrofitted to existing internally lighted cabinet signs, pole and pylon signs,
and Monument signs.
Click to Enlarge.
UL or ETL listed Sign Component
Underwriters Laboratories has evaluated PinLights™ and they have been approved for use in outdoor, damp and wet location signs.
UL Approval #E345252.
Ours are the only products so approved.
As the manufacturer we are very proud of this.
Energy-Saving ™ PinLights™ Signs
PinLights™ consume 0.1 watt per light at 5 volts DC! One thousand lights left on 8 hours per day for 365 days will use $4.01 in electricity.
State Licensed Sign Installation and Sign Service
We are a full-service sign company.
sign site surveys,
services for electrical and non-electrical signs for our customers as well as other sign
provide this work in Dallas, Fort Worth (DFW), and ALL of
North Texas and Northeast Texas.
State Sign and Electrical License Numbers: TECL17503, TSCL18015, TSCL18016.
Our technicians are also
Quality Certified Signs™ certified. (Click the "Installation
& Service" tab for details.)
serve and have installed signs in the Texas cities of
Athens, Aubrey, Avalon,
Blue Mound, Bonham,
Burleson, Caddo Mills, Canton,
Cedar Hill, Celina,
Cleburne, Cockrell Hill,
The Colony, Combine,
Desoto, D/FW Airport, Dido,
Duncanville, Eagle Mountain Lake,
Farmers Branch, Farmersville,
Flower Mound, Forest Hill,
Greenville, Gun Barrel
Hillsboro, Hudson Oaks,
Irving, Italy, Itasca,
Kennedale, Kleberg, Krum,
Las Colinas, Lawson,
Little Elm, Longview,
Mineral Wells, Mount
Pleasant, Mount Vernon,
North Richland Hills,
Parker County, Pelican
Plano, Ponder, Princeton,
Red Oak, Rendon,
Richland Hills, Rice,
Sansom Park, Sanger,
Sherman, Silver Creek,
Stephenville, Sulphur Springs,
Trophy Club, Tyler,
University Park, Van
Alstyne, Valley View,
Westover Hills, Wheatland,
White Settlement, Whitney, Wichita Falls,
ZIP Codes 75001 thru 76958.
Area Codes 214, 254, 430, 469, 682, 817, 903, 940, and
Serving Collin, Cook,
Dallas, Denton, Ellis, Fannin, Franklin, Grayson,
Henderson, Hill, Hood, Hopkins, Hunt, Johnson, Kaufman,
Lamar, Navarro, Parker, Rockwall, Somervell, Tarrant,
Titus, Van Zandt, Wood, and Wise Counties in Texas.
We also have signs in 43 different
states, and 6 other nations.