|
I REQUIRE THE
FOLLOWING FROM MY SIGN COMPANY |
YES |
|
|
·
|
|
Lifetime Warranty |
·
|
|
“Partial” and “Final” Lien Releases to insure that
My Deposit and Final Payment Money is used to pay
for Materials and Labor used in My Sign, so that I
am not legally personally liable for these debts |
·
|
|
$2,000,000 General Liability Insurance |
|
|
Product Liability Insurance |
|
|
State of Texas License to Manufacture Signs |
|
|
Underwriter's Laboratory (UL) Listed Signage |
|
|
Electric Sign Authority (ESA) Listed Signs |
|
|
Signs Manufactured In-House (NOT subcontracted) |
|
|
.063, #3003 H-14 or heavier Aluminum Sign Panels
(NOT steel or “Paint-grip”) |
|
|
Welded Structural Steel inner frames |
|
|
Certified Welding |
|
|
Structural Frame Painted PRIOR to Exterior Skins
being Attached (Prevents Rust) |
|
|
All
Seams Caulked |
|
|
Drain Holes |
·
|
|
Interior and Exterior of Sign EPOXY Primed Prior to
Painting |
·
|
|
UV
Stabilized Acrylic Urethane (automotive) quality
paints used (Wyandotte Grip-Gard, Grip-Flex, and
Meta-Flex paints) or equal |
·
|
|
Inside of Sign Cabinet Painted Reflective White |
·
|
|
Only Cyro impact-Modified-Acrylic, GE Lexan, 3M or
Cooley Flexible Sign Face Material used for Sign
Faces |
·
|
|
Sign Faces must be removable without taking the sign
to the ground |
·
|
|
SolarGuard™ Clear Solar Protection on Plastics,
and/or |
·
|
|
OptiGard™ Flexible Sign Face Protection System |
·
|
|
Lumabrite™ Optical Brighteners on Plastics |
·
|
|
Self-cleaning Sign Faces |
·
|
|
UV
Stabilized Translucent Wyandotte Grip-Flex, paint
(or equal) used for Graphics |
·
|
|
“Daylight” Illumination |
·
|
|
Brighter Signs™ Technology |
|
|
High-output fluorescent or HID internal signage
lighting |
·
|
|
Energy-saving Electrical Components |
|
|
Hi-pot tested Electrical Circuits |
·
|
|
Every Ballast Fused |
·
|
|
Pre-heat circuits individually tested at EVERY
socket |
|
|
Neon made In-House (NOT subcontracted) |
|
|
Computer Generated (exact) Neon Patterns |
|
|
Nickel-Flex Electrodes with Dumet alloy inner leads,
heavy-gauge solid-nickel corrosion-proof 7-strand
exterior leads and ceramic collars used on all neon |
|
|
All Neon “burned-in” prior to installation (24 hours
minimum) |
|
|
Transformer loading checked by both voltage and
amperage tests |
|
|
Only Ground Fault Indicating transformers used in
this sign |
|
|
Only Translux high-voltage silicone-insulated wire
used during neon installation |
|
|
Neon Electrode Boots as required by Underwriter’s
Laboratory |
·
|
|
Only Glass tube/wire supports with stainless steel
bases used (NOT plastic) |
·
|
|
Sign meets Underwriter's Laboratory, National
Electrical Code, State and City Code standards |
·
|
|
In-House Installation & Service (NOT subcontracted) |
·
|
|
All components will be new. |
·
|
|
All fasteners will be galvanized or non-corrosive. |
·
|
|
Signs attached to poles are Welded in Place |
·
|
|
The work area will be left in a broom-clean
condition |
·
|
|
Permit acquisition labor is included in this
quotation |
·
|
|
Installations supervised by a State Licensed Master
Sign Electrician, Master Electrician, and |
·
|
|
State Licensed Sign Installers and State Licensed
Electricians will be used |
·
|
|
Maintenance Manual |
·
|
|
Free Co-op Advertising Program |
|
|
Free "Coming Soon" Parking-lot Sign |
|
.jpg)
