296AT High Output Fluorescent Ballast lights 12' min-16' max 2 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 296AT   $88.86 each

348AT High Output Fluorescent Ballast lights 6' min-12' max 3, 2, or 1 lamp

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 348AT   $85.20 each

448AT High Output Fluorescent Ballast lights 8' min-18' max 4, 3, or 2 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 448AT   $105.30 each

472AT High Output Fluorescent Ballast lights 16' min- 24' max 4, 3, or 2 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 472AT   $92.44 each

496AT High Output Fluorescent Ballast lights 24' min- 32' max 4, 3, or 2 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 496AT   $183.32 each

648AT High Output Fluorescent Ballast lights 8' min- 24' max 6, 5, or 4 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 648AT   $134.34 each

4120AT High Output Fluorescent Ballast lights 20' min- 40' max 4, 3, or 2 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 4120AT   $168.76 each

672AT High Output Fluorescent Ballast lights 24' min- 36' max 6, 5, or 4 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 672AT   $231.50 each

696AT High Output Fluorescent Ballast lights 30' min- 48' max 6, 5, or 4 lamps

Ferromagnetic High Output Fluorescent Ballast for Outdoor Signs.

Allanson's ferromagnetic fluorescent ballasts are regarded as the most dependable ballast in the industry.

Reliable cold-weather operation, small housing size and lowest current draw.

For use with Rapid start lamps (2 pins or hot cathode).  Recommended for Fluorescent Lighting in Outdoor Sign applications.

800 mA output for High Output Fluorescent lamps, provides higher light output, increasing the brilliance of your electrical sign. Thermally protected class ''P'' ballasts, automatically turn off when the ballast is hot, thus extend the longevity of the ballasts.

277v available upon request.

SKU: 696AT   $274.95 each

Advanced Magnetic HID Ballast Core & Coil Kits 120-480v for 400w MH

To support replacement and retrofit needs for a broad range of Metal Halide, Pulse-Start Metal Halide, High Pressure Sodium, and Mercury lighting applications.

Advance's broad range of Metal Halide, Pulse-Start Metal Halide, High Pressure Sodium, and Mercury lighting applications HID Replacement Kits assemble the required components in one convenient package and eliminate the need for loose components or single voltage ballasts for 120 – 480 volt applications.

SKU: AMB   $86.74 each

Cabinet Sign Push In Fluorescent Lamp Socket

For fluorescent high output sign lamps.

SKU: 730   $10.00 / pair

Cabinet Sign Fluroescent Tombstone Lamp Socket

For fluorescent high output sign lamps.

SKU: 782   10.00 / pair

Marque Sign Letters (3 7/8" acrylic) - Box of 300, Black Acrylic

Our sign letters are made of a durable, impact acrylic resin that protects the letters from weathering, turning yellow and becoming brittle in sunlight. Many of our competitors offer PVC letters which will turn yellow/brown and become brittle in sunlight.  Sold in boxes of 300 black letters on a clear acrylic background panel.  Style matches the photo to the left.

3" (3 7/8" acrylic) Letters $206.00 / set of 300

4" (4 7/8" acrylic) Letters $225.00 / set of 300

6" (6 7/8" acrylic) Letters $339.00 / set of 300

8" (8 7/8" acrylic) Letters $544.00 / set of 300

10" (11 7/8" acrylic) Letters $734.00 / set of 300

Telescoping Changeable Letter Pole with 3" Suction Cup

Telescopes from 6' to 18' (larger sizes are available).

Comes with 3.75" diameter suction cup.  Smaller suction cups are available for smaller marquee letters.

SKU: 18POL  $127.40

Suction Cup Replacement

2" diameter suction cup replacement

3.75" diameter suction cup replacement

7" diameter suction cup replacement

Cast Aluminum Letter Pole "Elbow"

Attaches to the end of a telescoping pole.  Accepts suction cups (above).

SKU:  RRELBOW  $4.80

Suction Cup & Attachment Assembly

2" diameter suction cup with assembly

3.75" diameter suction cup with assembly

Double 3.75" diameter suction cup with assembly

7" diameter suction cup with assembly.

Neon Open Sign

11"x24"x3" neon window sign reading "OPEN".  Includes plug-in cord and pull-chain on/off.  For use with 120 volt electrical outlets.

SKU:  1124OPEN  $198.00

Double Line Electronic Window Display

Indoor programmable unit displays 1-3 lines of red, green and yellow characters.  A handheld keyboard controls the unit (included).

80 columns.

26.5"x6.5"x3.5"

SKU:  D80EWD  $1,350.00

Single Line Electronic Window Display

Indoor programmable unit displays 1 line of red, green and yellow characters.  A handheld keyboard controls the unit (included).

120 columns.

39.5"x4.0"x3.5"

SKU:  S120EWD  $590.00

Sidewalk Sign

Double-sided dry erase board with weighted base.

24"x36" dry erase panel area.

SKU:  SSDE2436  $585.00

Pennant Flags

Strings of multi-colored flags.

30' string, SKU:  PF30  $45.00

60' string, SKU:  PF60  $86.00

100' string, SKU:  PF100  $143.00

Neon Glass Tube Support 1 3/4'' Alum. Base w/ tie wire

Height: 1 ¾"

Glass stand-off with aluminum base and attached tie wires.  Use for mounting neon tubing to sign back or enclosure.

Si15,000 VAC, 105 degrees C.  Meets construction requirements of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99.  Meets the integral sleeve requirement of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99.  UL listed to replace regular GTO and separate sleeve combination in any application normally requiring GTO and sleeving.

Material: Stranded Tinned Copper

Size: 14AWG

Other styles and sizes available

SKU: WA1 13/4   $10.00 / bag of 10

Neon GTO Wire with Integral Sleeve by Page Tuf-Hide

15,000 VAC, 105 degrees C.

Meets construction requirements of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99.  Meets the integral sleeve requirement of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99.  UL listed to replace regular GTO and separate sleeve combination in any application normally requiring GTO and sleeving.

Material: Stranded Tinned Copper

Size: 14AWG

Color: Black (also available in white and gray by the 250 role only call for pricing)

SKU: WLP60B   $10.00 / length of 10'

Neon Wide End Cap (Electrode Cover) 15 mm

Use to insulate double back connections between electrodes and GTO

Great for portable signs.

Non-breakable.

Fits 15 mm tubing.

Listed to applicable US and Canadian standards and requirements by Underwriters Laboratories, Inc.® for dry and damp locations

SKU: WPESW15mm $12.00 / bag of 10

Neon Wide Short Sleeves 15mm Rubber Boot

Use to insulate straight aligned connections between electrodes and GTO cable

Great for portable signs.

Non-breakable.

Fits 15 mm tubing.

Listed to applicable US and Canadian standards and requirements by Underwriters Laboratories, Inc.® for dry and damp locations

SKU: WPES15   $12.00 / bag of 10

Neon Federal Bushings, 1/2 Porcelain

Federal Bushing, 1/2'' Porcelain.

Use to pass GTO cable through raceway barriers.  Made from electrical grade porcelain glazed ceramic, ½'' conduit threads with locknut, pre-assembled

Thread depth: 11/16'' (8 threads)

SKU: FB   $10.00 / box of 10

Neon High Voltage GTO Splice Connectors

High Voltage Connector insulates splice between two GTO cables. When routed through listed sign enclosures, GTO cables should be covered with GtoSleeving® or GtoCovering®. When routed outside listed sign enclosures, GTO cables should be covered with GtoSleeving® and routed through flexible or rigid metallic conduit.

Description: One piece die cast zinc housing with mounting bracket, ground screw, one-screw duplex clamp and one piece insulator cap made of flame retardant Pyrolene II. UV and ozone resistant. FOR DRY AND DAMP LOCATIONS ONLY

15 KV mid-point grounded, 105 degree C,

SKU: HVNSC   $15.00 / pair

Neon Pk Housing

PK 1/2'' Hex (Female) Fitting w/ Flange. PK Housings provide the best way to penetrate walls for electrode connections Integral mounting flange provides a bonding means for the metal backed sign body without requiring a separate bonding conductor. 2 3/8'' OD Flange provides very secure mounting with 4 .150'' mounting holes located on a 2'' diameter Zinc plated steel and borosilicate glass construction 1-2-3 spring assembly facilitates easy GTO cable connection

Rated for 7500 volt applications, including 15,000 V mid-point referenced transformer installations

Panel Hole: 1 3/8''

SKU: PK   $24.00 / box of 2

Neon Transformer Toggle Switch 20 amp.

Toggle Switch, 20 Amp, 120-277 VAC, 1 ½ HP. 6'' lead wires. Internal Toggle Seal. Silicone Boot. On-Off Faceplate. ½'' Panel Opening. Pre-assembled. Recognized to US and Canadian requirements

SKU: TS   $15.00 / box of 2

Neon Transformer Can (top off)

 17''x7''x7''

UL Listed for protected (damp) locations

Strong and rigid; made of G90 galvanized steel sheet .029 inch thick. Convenient ½'' conduit knockouts – 6 on each end, Knockouts for toggle switch – 2 on each end. Multiple louvers on each end to maximize ventilation and extend transformer life. Exceeds requirements of the 1999 NEC, Article 600-8.

SKU: WJTBUL   $19.80 each

Neon Glass Housing Small

Affordable and safe method for making neon electrode connections in raceways.  Suitable for indoor, outdoor protected, and outdoor exposed (wet) locations.  Borosilicate heat resistant glass.  Spring contact allows for easy neon tube servicing.  Rated for 7500 volt applications, including 15,000 V mid-point referenced transformer installations.

Comes with a plated steel ferrule to secure the unit to the sign enclosure.

Panel Hole: 1 3/8''

Housing Opening: 7/8''

Overall Height: 3 1/2''

SKU: GH200   $10.00 / pair

Glass Housing Large

Affordable and safe method for making neon electrode connections in raceways.  Borosilicate heat resistant glass.  Spring contact allows easy neon tube servicing.  Rated for 7,500 volts.

Comes with a plated steel ferrule to secure the unit to the sign enclosure.

Panel Hole: 1 5/8''

Housing Opening: 1 3/8''

Overall Height: 3 5/8''

SKU: GH100   $12.00 / box of 2

France 15,000v 30ma 120v standard outdoor neon transformer

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.

LED diagnostics, reduces troubleshooting time.

Same dimension as all UL506 models, which means there is no need to redesign casings, raceways or existing signs in order to take advantage of a more reliable and safer transformer.

A 29-minute by-pass switch, which enables efficient fault detection, in the same manner that you were accustomed to work with old UL506 transformers.

Three automatic resets, eliminating nuisance tripping, providing continuous and better performance, thus saving service costs.

Available in 277v.

SKU: 15000/30ma   $167.68 each

France 7,500v 30ma 120v standard outdoor neon transformer

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.

LED diagnostics, reduces troubleshooting time.

Same dimension as all UL506 models, which means there is no need to redesign casings, raceways or existing signs in order to take advantage of a more reliable and safer transformer.

A 29-minute by-pass switch, which enables efficient fault detection, in the same manner that you were accustomed to work with old UL506 transformers.

Three automatic resets, eliminating nuisance tripping, providing continuous and better performance, thus saving service costs.

Available in 277v.

SKU: 7500/30ma    $132.50 each

France 9,000v 30ma 120v standard outdoor neon transformer

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.

LED diagnostics, reduces troubleshooting time.

Same dimension as all UL506 models, which means there is no need to redesign casings, raceways or existing signs in order to take advantage of a more reliable and safer transformer.

A 29-minute by-pass switch, which enables efficient fault detection, in the same manner that you were accustomed to work with old UL506 transformers.

Three automatic resets, eliminating nuisance tripping, providing continuous and better performance, thus saving service costs.

Available in 277v.

SKU: 9000/30ma    $141.48 each

France 12,000v 30ma 120v standard outdoor neon transformer

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.

LED diagnostics, reduces troubleshooting time.

Same dimension as all UL506 models, which means there is no need to redesign casings, raceways or existing signs in order to take advantage of a more reliable and safer transformer.

A 29-minute by-pass switch, which enables efficient fault detection, in the same manner that you were accustomed to work with old UL506 transformers.

Three automatic resets, eliminating nuisance tripping, providing continuous and better performance, thus saving service costs.

Available in 277v.

SKU: 12000/30ma    $165.06 each

Allanson 7,500v 120 30ma indoor hanging neon transformer

HP Indoor Hanger

The Allanson Indoor Hanger type can be mounted with traditional hanging bracket or base-plate mount and it is Ground Fault Protected.

Recommended for window frame Neon Signs and indoor neon lighting applications.

Hanging bracket, enabling easier installation and dual mounting methods in indoor applications.

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.  Supplied with cord and plug, primary switch and secondary GTO leads, saving wiring costs during installation of your neon signs.

Sleeveless GTO # 16 AWG 15 kV, eliminates the need for additional sleeving, thus minimizes loses while operating the electrical sign.

SKU: 7500 30ma hanger   $217.84 each

Allanson 9,000v 120 30ma indoor hanging neon transformer

HP Indoor Hanger

The Allanson Indoor Hanger type can be mounted with traditional hanging bracket or base-plate mount and it is Ground Fault Protected.

Recommended for window frame Neon Signs and indoor neon lighting applications.

Hanging bracket, enabling easier installation and dual mounting methods in indoor applications.

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.  Supplied with cord and plug, primary switch and secondary GTO leads, saving wiring costs during installation of your neon signs.

Sleeveless GTO # 16 AWG 15 kV, eliminates the need for additional sleeving, thus minimizes loses while operating the electrical sign.

SKU: 9000 30 hanger   $221.56 each

Allanson 12,000v 120 30ma indoor hanging neon transformer

HP Indoor Hanger

The Allanson Indoor Hanger type can be mounted with traditional hanging bracket or base-plate mount and it is Ground Fault Protected.

Recommended for window frame Neon Signs and indoor neon lighting applications.

Hanging bracket, enabling easier installation and dual mounting methods in indoor applications.

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.  Supplied with cord and plug, primary switch and secondary GTO leads, saving wiring costs during installation of your neon signs.

Sleeveless GTO # 16 AWG 15 kV, eliminates the need for additional sleeving, thus minimizes loses while operating the electrical sign.

SKU: 12000 30 hanger   $230.04 each

Allanson 15,000v 120 30ma indoor hanging neon transformer

The Allanson Indoor Hanger type can be mounted with traditional hanging bracket or base-plate mount and it is Ground Fault Protected.

Recommended for window frame Neon Signs and indoor neon lighting applications.

Hanging bracket, enabling easier installation and dual mounting methods in indoor applications.

Secondary circuit ground fault protection, interrupting transformer output to eliminate the danger of a fire in case of an arc to ground.  Supplied with cord and plug, primary switch and secondary GTO leads, saving wiring costs during installation of your neon signs.

Sleeveless GTO # 16 AWG 15 kV, eliminates the need for additional sleeving, thus minimizes loses while operating the electrical sign.

SKU: 15000 30 hanger  $236.64 each

Ventex VT 6030 120V Indoor Neon Power Supply

Indoor Generation III Models

Advanced Performance — Ventex Indoor Neon Power Supplies are your first and only choice for indoor neon signage and decoration. With exclusive Generation III power supplies ranging from 2kV to 6kV, Ventex offers the most technologically advanced neon power supplies available.

User Friendly — Ventex makes it easier for you to create your best neon signage. Smaller, light weight designs allow for simple and quick installation. And Ventex’s full 30mA makes your neon signs crisper, brighter and uniform intensity. With several dimming models, you can even tailor the intensity to any environmental situation.

Reliability — Ventex Indoor Neon Power Supplies have been UL 2161 Listed and field proven since 1997.

Features — In response to industry requests we include 32”GTO leads, 10 foot power cord, on/off switches on all units, GTO clamping system and other standard features that a sign professional needs.

Product Scope — Ventex Indoor units are available in models from 4K to 12K in 120 or 220/240 volts including two and three level dimmable models.

Features Unique to Ventex Indoor Neon Power Supplies

• Field proven performance since 1997

• True 30mA output

• 10 foot power cord

• 9kV and 12kV dimmable models available

• On/Off pull chain or switch

• Available in 120VAC, 220VAC/240VAC

• 32” GTO leads or GTO clamping

SKU: 101  $90.00 each

Ventex VT 9030 120V Indoor Power Supply

Indoor Generation III Models

Advanced Performance — Ventex Indoor Neon Power Supplies are your first and only choice for indoor neon signage and decoration. With exclusive Generation III power supplies ranging from 2kV to 9kV, Ventex offers the most technologically advanced neon power supplies available.

User Friendly — Ventex makes it easier for you to create your best neon signage. Smaller, light weight designs allow for simple and quick installation. And Ventex’s full 30mA makes your neon signs crisper, brighter and uniform intensity. With several dimming models, you can even tailor the intensity to any environmental situation.

Reliability — Ventex Indoor Neon Power Supplies have been UL 2161 Listed and field proven since 1997.

Features — In response to industry requests we include 32”GTO leads, 10 foot power cord, on/off switches on all units, GTO clamping system and other standard features that a sign professional needs.

Product Scope — Ventex Indoor units are available in models from 4K to 12K in 120 or 220/240 volts including two and three level dimmable models.

Features Unique to Ventex Indoor Neon Power Supplies:

• Field proven performance since 1997

• True 30mA output

• 10 foot power cord

• 9kV and 12kV dimmable models available

• On/Off pull chain or switch

• Available in 120VAC, 220VAC/240VAC

• 32” GTO leads or GTO clamping

SKU: 102  $100.00 each

Ventex VT 1230 120V Indoor Power Supply

Indoor Generation III Models

Advanced Performance — Ventex Indoor Neon Power Supplies are your first and only choice for indoor neon signage and decoration. With exclusive Generation III power supplies ranging from 4kV to 12kV, Ventex offers the most technologically advanced neon power supplies available.

User Friendly — Ventex makes it easier for you to create your best neon signage. Smaller, light weight designs allow for simple and quick installation. And Ventex’s full 30mA makes your neon signs crisper, brighter and uniform intensity. With several dimming models, you can even tailor the intensity to any environmental situation.

Reliability — Ventex Indoor Neon Power Supplies have been UL 2161 Listed and field proven since 1997.

Features — In response to industry requests we include 32”GTO leads, 10 foot power cord, on/off switches on all units, GTO clamping system and other standard features that a sign professional needs.

Product Scope — Ventex Indoor units are available in models from 4K to 12K in 120 or 220/240 volts including two and three level dimmable models.

Features Unique to Ventex Indoor Neon Power Supplies:

• Field proven performance since 1997

• True 30mA output

• 10 foot power cord

• 9kV and 12kV dimmable models available

• On/Off pull chain or switch

• Available in 120VAC, 220VAC/240VAC

• 32” GTO leads or GTO clamping

SKU: 103   $150.00 each